Precautions for use of shaking incubator

Precautions for shaking incubator use

1. Before using the shaking incubator, you should read the instruction manual. The shaking incubator is an indispensable experiment for precision cultivation preparation in scientific research, education and production departments such as plants, biology, microorganisms, genetics, viruses, medicine, environmental protection, food, petroleum, and chemical industry.

2. During the use of the shaking incubator, it is strictly forbidden to extend your fingers into the gap between up and down movements. The shaking incubator is strictly prohibited to be used in direct sunlight.

3. When the incubator is cooling, the ambient temperature should be below 32℃. When the ambient temperature is above 25℃ and refrigeration is used, the number of times to open the shaking incubator door should be minimized.

4. Before the shaking incubator is used, all control switches should be in a non-working state, and the speed control knob should be placed in the small position.

5. The electrical rated parameters of the socket should not be less than the electrical rated parameters of the machine, and must have good grounding measures.

6. The shaking incubator should be placed on a flat ground, and the environment should be clean, tidy, dry and ventilated.

7. When replacing the fuse, pull the plug from the socket. After the incubator wire or electrical equipment fails, it should be repaired by a professional.

8. The heated object should be cooled at ambient temperature before being placed in the shaking incubator. It is strictly prohibited to put the heated object directly in the cooling incubator to prevent danger.

9. Placement of culture test bottles: In order to make the full-temperature shaking incubator have a good balance performance during shaking and avoid large vibrations, all test bottle positions are fully filled, and the culture medium of each bottle should be approximately equal. If the culture medium is insufficient, the test bottles can be placed symmetrically.

10. If the shaking incubator is not used for a long time, the power cord should be unplugged to prevent the device from being charged with electricity. And should be regularly (generally one quarter) according to the operating conditions for 2-3 days to expel the moisture of electrical components and avoid damage to related devices.

(Disclaimer: The article comes from the Internet, only for learning and communication, please contact us to delete if infringement is involved. For specific use of Zhichu shaking incubator, please follow the product manual or consult Zhichu engineers)